Off-Grid

Specifications:

1. Normal input voltage and output power: 500W 12VDC; 1KW 12VDC or 24VDC; 2KW 12VDC or 24VDC; 3KW 48VDC, 5KW 48VDC or 96VDC

2. Normal output frequency: 50 +/- 0.05 Hz (true-sine wave)

3. Normal output voltage: 220V±3% (Three-phase 380V±5%)

4. Peak power output: Single-phase 20KVA (three-phase 100KVA)

5. Contravariant cut time: <6ms, guarantee the power source with the continuity

6. Charging current: The CPU intelligence control automatic charge, sufficient protection; maximum charging current may reach 15A

7. Load capacity: 120%, 5 seconds automatic shut down, 1min 159% 10S

8. CF coefficient: 3:1

9. Invert efficiency (80% resistive load): >88%

10. Short-voltage protection: for each 12V battery, 10V±0.5 automatic stop.

11. Storage and transport ambient temperature: - 40oC ~ 80oC

12. Operation ambient temperature: - 25oC ~ 50oC

13. Operation ambient humidity: 0- 85%.

14. Altitude above sea level: ≤ 2500M

Grid-Tie

The solar-wind grid-connected power system includes small wind turbine dump load, grid-connected inverter, and meter and power switchboard. When wind speed reaches the cut-in speed, the AC power from the wind turbine will be fed in the utility grid after rectifying and inverting. If the wind speed is too high, part of the dump load will be connected to the wind turbine to keep the constant power to feed the utility grid.

Feature

1. DSP controller

2. MPPT (Maximum Power Point Tracking) technology

3. High efficiency up to 95%

4. Perfect protect functions include anti-islanding

5. in accordance with IEEE929-2000,UL1741

6. Quick and easy installation

7. A LCD display for monitoring all system information

8. Can set the operation parameters via LCD and keys

9. Boost circuit provide wide AC input range

10. Mitsubishi IPM Module inside

11. Electrical brake

12. CE Certificate